Facade Solutions
TS110DC-285 Exposed Fixing with Screws on an Aluminum Subframe - Deep Cavity
Panels of minimum 5/16” (8mm) thickness or more can be fixed onto an aluminum subframe (on buildings where the performance criteria of NFPA 285 are required. This subframe must consist of battens of sufficient strength and permanent durability. Powdercoated screws are available in all standard Trespa colors.
Technical Details
• Exposed fixing with screws or blind rivets
• Max sheet size: 143" x 73" (3650x1860mm)
• 5/16" (8mm) minimum panel thickness
• Easy installation
FIXING SYSTEMS
Not all the systems shown here are suitable for all applications and jurisdictions.
Trespa provides testing, code and design data for informational purposes only and strongly recommends that the customer obtains independent advice regarding compliance with design requirements, applicable codes, laws and regulations, and test standards.
Please check your local codes and design requirements.
Multi Story Fire Test
Trespa systems have successfully passed the NFPA 285, a full scale fire test referred to by the IBC and required for specific multi story applications in the USA. Please refer to the drawings on this website for the exact design details of these specific NFPA 285 systems. In addition, the Trespa installation systems, as described on the ULC online directory, meet the CAN/ULC-S134 standard in combination with uni-color or metallic panels in the defined thicknesses. For projects requiring compliance with Canadian Standard CAN/ULC-S134, please contact our Technical Services Department for more information or refer to the listing in the ULC online directory.