Facade Solutions
TS210 Concealed Bracket-Railfix on an Aluminum Subframe
Panels of minimum 3/8” (10mm)* thickness may be fixed invisibly (on buildings where performance criteria of NFPA 285 are not required) by attaching metal hanging brackets with inserts of screws to the back of the panel. The panels are fixed to a metal subframe. Each panel has two adjusting points and a fixed point at the top, so adjusting is possible and unwanted movement of the panel cannot happen.
*When utilizing this fixing method with Gloss texture, 1/2” (13mm) panel thickness is required.
Technical Details
• Invisible fixing with the highest degree of design freedom
• Max sheet size: 143" x 73" (3650x1860mm)
• Fixing with brackets and rails
• 3/8" (10mm) minimum panel thickness with exception of Gloss texture which requires 1/2" (13mm) minimum panel thickness
FIXING SYSTEMS
Not all the systems shown here are suitable for all applications and jurisdictions.
Trespa provides testing, code and design data for informational purposes only and strongly recommends that the customer obtains independent advice regarding compliance with design requirements, applicable codes, laws and regulations, and test standards.
Please check your local codes and design requirements.